Corrosive slurry
Confirm medium, duty, material and installation details for this application.
Single-Stage Non-Metallic Slurry Pump
Non-metallic slurry pump option for duties that combine abrasion and compatible corrosive media.
Product overview
Position the pump within the complete duty.
Non-metallic slurry pump option for duties that combine abrasion and compatible corrosive media.
Non-metallic slurry selection balances material compatibility with particle impact, abrasion, solids loading and temperature boundaries.
- Non-metallic option
- Medium and temperature review
Verified operating envelope
Technical parameters
Values define the supplied product range. Final model selection still depends on the complete duty point and medium.
| Configuration | Single-stage, single-suction |
|---|---|
| Inlet diameter | 32–200 mm |
| Flow | 3–500 m³/h; confirm against selected model |
| Head | 5–70 m |
| Temperature | Up to 100°C |
| Wetted material | Steel-lined UHMWPE |
Construction & operating principle
How the configuration supports the duty
- 01
Steel reinforcement supports the non-metallic UHMWPE wetted structure.
- 02
Dynamic or mechanical sealing is selected around the actual slurry and suction conditions.
Applications
Typical discussion contexts
These contexts guide the initial review; the actual medium and system conditions remain the selection basis.
Process slurry circulation
Confirm medium, duty, material and installation details for this application.
Abrasive-media transfer
Confirm medium, duty, material and installation details for this application.
Product RFQ
Discuss this pump against your operating data.
The product is prefilled. Add the flow, head, medium, temperature and application details currently available.